Crucial: The quality of control Burners significantly determine the energy quality in copper production. The efficiency of a burner is the result of elaborate burner design and reliable control quality. Burner, fittings, measurement equipment, safety and control equipment and also ventilators are available from us as a synchronised complete system. This is the very foundation for a reproducible ratio of air and fuel with ideal fluid mixture.
High level of safety For safety reasons our burners are based on the functional principle of a diffusion flame. There is no pre-mixing of oxidator and fuel. In our systems both substances are fed separately to the combustion chamber and are mixed only there.
Your benefits:
Continuous monitoring and control of air and fuel
Flexible adjustment of the burner performance to changing operating modes for melting and holding
Exact temperature control
Operation of the burner with gas, oil or solid fuels – maximum flexibility by using multi-fuel burners
Lower fuel consumption and reduced NOx by using oxygen burners
Water-cooled burners with specially designed water recooling systems for applications with high thermal load
Customised equipment
Extensive technology for reliable control quality
High Energy Efficiency Burner for emissions far below the legal requirements
Modern copper production places high demands to the process and is subject to continuously more stringent regulations regarding NOx and CO emissions. With the experience of over 130 years working in the thermal process, we have this task accepted.
The result of our development activity is the High Energy Efficiency Burner – in short HEE. This burner is an improved high impulse burner. The innovative technology result in an increased heat yield in the material with near-stoichiometric operation. Thanks to the formation of the flame with a significantly stronger impulse and higher exit velocity the mixing quality of oxidator and fuel is optimised. With regard to combustion technology, all kinds of stoichiometric requirements can be reproducable reached.
In view of the achieved results regarding NOx and CO emissions you will continue to fulfill the most stringent legal requirements also in the future. Practical experience with the new burner proves that actual values are less than half of the values of the TA Luft (Technical Instructions on Air Quality Control).
Due to the compact construction, the HEE burner is ideal for retrofitting.
High Energy Efficiency Burner
Flame pattern of the High Energy Efficiency Burner
